Skip to content
Snapline

Square Footage Calculator

Area of a rectangle, circle, triangle or trapezoid, in square feet, yards and meters.

Shape
Unit system

Examples: , ,

??

Enter length and width to see the result.

Short answer

For a rectangle, multiply the length by the width, both in feet. For any other room, split it into rectangles, triangles and circles, find each area and add them up. Divide square feet by 9 for square yards.

On this page

How do I use the square footage calculator?

  1. Pick the shape that matches the space: Rectangle for most rooms and lots, Circle for a round bed or patio, Triangle for a corner, Trapezoid for a space with one slanted side.
  2. Enter the measurements. You can type feet and inches together: 12, 12.5, 12 1/2 and 12' 6" all mean the same length.
  3. Read the area in square feet. The result also shows square yards and square meters.

How is the area worked out?

Each shape has one rule. Every measure is converted to the same unit before it is multiplied.

  • RectangleArea = L × W
  • CircleArea = π × (D ÷ 2)²
  • TriangleArea = B × H ÷ 2
  • TrapezoidArea = (a + c) ÷ 2 × H

A trapezoid is a four-sided shape with one pair of parallel sides, a and c.

What the symbols mean
SymbolMeaningUnit
LLength of the rectangleft (m)
WWidth of the rectangleft (m)
DDiameter, through the centerft (m)
BBase of the triangleft (m)
HHeight, at a right angle to the baseft (m)
aTop side of the trapezoidft (m)
cBottom side of the trapezoidft (m)

Measure the height straight across

For a triangle or a trapezoid, the height is the distance at a right angle to the base. Do not measure along the slanted side: it is always longer, and the area comes out too big.

Worked example

A rectangular room that is 10 feet by 12 feet.

You enter
ShapeRectangle
Length10' 0"
Width12' 0"
You get
Area120 ft²
Square yards13.3 yd²
Square meters11.15 m²

A common mistake

Writing 10 feet 6 inches as 10.6. Inches are twelfths of a foot, so 6 inches is 0.5 foot and the length is 10.5. Type 10' 6" and the calculator does the conversion.

How do I measure an L-shaped or odd room?

Split the space into simple shapes. For an L-shaped room, one line turns it into two rectangles. For a room with a bay window, treat the window as a trapezoid or a triangle and add it to the main rectangle.

Run the calculator once for each piece and add the areas. If one piece is a closet or an island you will not cover, leave it out instead.

Example: an L-shaped room cut into two rectangles
PieceArea
Main room, 15 × 12 ft180 ft²
Alcove, 5 × 8 ft40 ft²
Total220 ft²

Measure at floor level

Write the numbers down as you go. Walls are not always perfectly straight, so a second measurement of the longest wall is a cheap way to catch a mistake.

How do I change square feet to square yards or meters?

Flooring is often priced per square yard, and many suppliers outside the US use square meters. These conversions are exact by definition: 1 yd² is 9 ft², and 1 ft² is 0.09290304 m².

Square feet in other units
Square feetSquare yardsSquare meters
50 ft²5.56 yd²4.65 m²
100 ft²11.11 yd²9.29 m²
250 ft²27.78 yd²23.23 m²
500 ft²55.56 yd²46.45 m²
1,000 ft²111.11 yd²92.90 m²

Material sold by volume, such as gravel or mulch, also needs a depth. See the mulch calculator and the gravel calculator.

Frequently asked questions

How do I find the square footage of a circle?

Multiply pi by the radius squared, where the radius is half the diameter. A circle that is 10 feet across has a radius of 5 feet, so its area is π × 5 × 5, about 78.5 square feet. Measure the diameter through the center, at its widest.

How many square feet are in a square yard?

Nine. A square yard is 3 feet by 3 feet, and 3 × 3 = 9. To change square feet to square yards, divide by 9.

How do I convert square feet to square meters?

Multiply by 0.09290304. That number is exact, because a foot is defined as exactly 0.3048 meters and 0.3048 × 0.3048 = 0.09290304. To go the other way, divide by 0.09290304.